Assembled Bicolor Red/Green Fascia Controller for Octo III Micro Singlet, QuadPIC, QuadLN, SwitchWright and Turtle
Plug the fascia controller in to our servo controllers to both actuate the board and to indicate its status.
The controller has one LED Red and the other Green, when the button is pushed the turnout will throw and the Red and Green LEDs reverse.  Two LEDS are on at all times but swap colors.  To connect the fascia controller you will need a servo extension cord (see below) or you can use hookup wires designed for 0.1" connectors of the type also used on Arduinos. (Advanced users: it is possible to remove a small SMD resistor and turn off each color in each position to make, for example, the only the green show in one position and only the red in the other position or some other combination).
 
FCB020  MSRP $6.00 USD